1986-1994 Mazda, Mercury Power Steering Rack Pinion Replacement

Part #637

$225.50

Specifications:

  • Rack and Pinion Assembly

Fitment:

  • 1988-1989 Mazda 323 – FWD
  • 1986-1987 Mazda 323
  • 1991-1994 Mercury Capri
  • 1987-1989 Mercury Tracer
View Fitment Compatibility
Weight 28 lbs
Dimensions 50 × 15 × 20 in

Additional Details

Check Compatibility Table
To Activate your Lifetime Warranty; you must send in your core unit. Call us when you order to get a return shipping label for your old unit.
New Oil and Lip Seals installed to ensure quality performance, Hydraulically Pressure Tested to Ensure Internal By-Pass for Both High & Low Pressure
Tie Rod Load, Road Simulated for Proper Functioning

Compatibility

YearMakeModelSubmodelPositionBody TypeDrive Type
+ Ford
+ Capri
1962 - 1965FordCapriBaseFront--
1964FordCapriGTFront--
+ Lincoln
1952 - 1959LincolnCapriBaseFront--
+ Mazda
+ 323
1986 - 1987Mazda323BaseFront--
1986 - 1987Mazda323DXFront--
1986 - 1987Mazda323LXFront--
1988Mazda323DXFront-FWD
1988Mazda323GTFront-FWD
1988 - 1989Mazda323BaseFront-FWD
1988 - 1989Mazda323LXFront-FWD
1988 - 1989Mazda323SEFront-FWD
+ GLC
1982 - 1983MazdaGLCCustomFrontWagon-
+ Mercury
+ Capri
1966 - 1994MercuryCapriBaseFront--
1979 - 1980MercuryCapriGhiaFront--
1981 - 1986MercuryCapriGSFront--
1982 - 1983MercuryCapriBlack MagicFront--
1982 - 1983MercuryCapriLFront--
1982 - 1985MercuryCapriRSFront--
1983MercuryCapriCrimson CatFront--
1984MercuryCapriRS TurboFront--
1986MercuryCapri5.0Front--
1991 - 1994MercuryCapriXR2Front--
+ Tracer
1987 - 1988MercuryTracerBaseFront--

Description

All of our Rack and Pinions are air leak tested to assure reliable performance, hydraulically tested for bypass/hi-pressure, road simulation tested, and have tie rod load checked. 100% new o-rings and lip seals to ensures no leaking and quality performance. All new Teflon rings are added to the spool valve on the rack donut, restoring internal sealing of the rack and pinion. Racks are surfaced to OE specifications, the proper surface finish will prevent leaking between chambers and extend unit life.

  • New Oil and Lip Seals installed to ensure quality performance
  • New Teflon rings installed on spoon valves to restore internal sealing of rack and pinion.
  • Racks are finished with proper surface to prevent leaking and to prolong life.
  • New Inner tie rods installed
  • Hydraulically Tested to Ensure Internal By-Pass for Both High and Low Pressures

Lifetime Warranty

To Activate your Lifetime Warranty; you must send in your core unit.